John Lewis 803/44204 Manual Download Page 3

Page: 3 / 7

Step by step assembly instructions

Step One

Screw the Bolts (E) into the holes indicated on the Top Rail (3).

Step Two

Place the Dowels (F) into the holes in the Headboard (1) and press down the Top Rail (3) onto the

Headboard (1). Fix the Top Rail (3) to the Headboard (1) using Cams (D) as shown below.

1. Lower the bolt

into the hole.

2. Place the cam into

the hole indicated,

arrow pointing

towards the bolt.

3. Tighten by turning

the cam to the right.

D x 2

x 3

E x 2 pcs

Summary of Contents for 803/44204

Page 2: ...st A B C D E Bolt x 8 Allen Key 4mm x 1 Cam x 2 Screw x 24 Bolt x 2 1 2 3 4 5 Headboard x 1 Footboard x 1 Top Rail x 1 Side Rails x 2 Slat Set x 1 2 M8 x 22 mm 30 mm 12 x 10 5 mm M6 x 24 mm Dowel x 3 10 x 30 mm Fittings Parts F ...

Page 3: ...into the holes in the Headboard 1 and press down the Top Rail 3 onto the Headboard 1 Fix the Top Rail 3 to the Headboard 1 using Cams D as shown below 1 2 3 1 Lower the bolt into the hole 2 Place the cam into the hole indicated arrow pointing towards the bolt 3 Tighten by turning the cam to the right 3 D D D x 2 F F x 3 3 E x 2 pcs E ...

Page 4: ...Step Three Fix the Side Rails 4 to the Headboard 1 and Footboard 2 using Bolts B as shown below Tighten using Allen Key A 4 4 B x 8 pcs 1 2 4 B B B 4 B 1 2 ...

Page 5: ... slide the rest down the bed until the last one reaches the Footboard ensuring the end Slats are as close to the Headboard and Footboard as possible Fix all Slats 5 in place using Screws C C C C C 5 4 C x24 pcs 5 This bed is not designed to be dismantled for storage or transportation after assembly ...