Cruisecontrol GC90 installation manual
4
1
Purpose, construction and operation of the GC90
1.1
Purpose of the GC90
The purpose of the GC90 is to automate your speed management.
1.2
Construction
The GC90 is part of a Cruisecontrol-kit that consists of:
universal components:
electronic module (EM);
command module (CM) (order separately);
universal wiring harness;
general installation manual;
user manual CM (included with CM);
installation manual CM (included with CM);
clutch switch (optional)
specific components:
specific T-harness (order separately);
specific installation manual T-harness (included with T-harness).
Depending on the modular supplies or the vehicle, more or less components are
applicable. Contact your supplier for more information.
1.3
Operation
The GC90 GoldCruise consists of a compact EM, that is connected between the
electronic accelerator pedal and the engine-control–unit (ECU) of the vehicle.
The EM “manipulates” the ECU and controls the relationship between the driving speed,
throttle valve position and fuel injection time. The manipulation occurs by varying the
output signals of the accelerator pedal. This means that the signal structure in the ECU is
not altered at all. Because the accelerator pedal is learnt to the system, the GC90
GoldCruise or speed limiter can make optimal use of the available engine power.