Converter Mounting
Read carefully these instructions before connecting the unit.
The operating voltage is indicated on the nameplate of the power adapter.
To prevent fire, short circuit, shock hazard: Do not expose the unit to rain or moisture.
Install the unit in a dry location without infiltration or condensation of water.
Do not expose it to dripping or splashing.
Do not place objects filled with liquids, such as vases, on the apparatus.
If any liquid should accidentally fall into the cabinet, disconnect the power plug.
Refer to qualified technician before it's further operation.
To avoid any risk of overheating: Install the unit in a well aery location and keep a minimum distance of 10 cm around
the apparatus for sufficient ventilation.
Do not place any items such as newspapers, table-cloths, curtains ... on the unit that might cover the ventilation holes.
The unit must not be exposed to any source of heat (sun, heater,...).
Do not place any naked flame sources, such as lighted candles, on the apparatus.
Do not install the product in a dusty place.
Pull out power plug to make the different connections of cables.
To avoid electrical shock, do not open the housing.
Cleaning :
Only use a dry soft cloth to clean the cabinet.
Do not use solvent.
Servicing :
For repairing and servicing refer to qualified personnel.
Swinging arm
Swinging Arm Mount
... or Mast Mount
Strap
Strap
Strap
... or Wall Mount
Clamp
Strap
Clamp
Strap
Converter
Make connections between LNB and Converter with supplied 90 cm. F / F coaxial cables.
Make the necessary connections
with supplied 40 cm. F / F coaxial
cables.
Customer Device Mounting
REC. 2
REC. 1
IN
Safety Instructions
80 mm
40
m
m