OCTO AV MODULATOR (REF. 8180)
6
1.5.
Configuring the Octo AV Modulator
N
AVIGATING THROUGH THE MENU
Use the Johansson rotary/push button to navigate through the menu. This is very
straightforward and simple. The table below shows how the rotary/push should be used:
Push
the button 3
s
to enter start the
configuration
Push
the button to enter the
configuration step (e.g. Region)
Rotate
the button, to scroll through the
different parameters.
Tap
to confirm.
M
ENU OVERVIEW
DISPLAY READOUT
EXPLANATION
Stand-by mode is indicated by flashing dots on display.
Push the rotary button for 3 seconds to access the menu.
When you enter the configuration step, the LEDs of the 8
AV CHANNELS will be GREEN.
Tap to select the channel plan from your region:
UHF.E = UHF Europe
= S38 - E69
Lt1.E = UHF Europe limited to CH60 = S33 - E60
Lt2.E = UHF Europe limited to CH48 = S27 - E48
LAT.A = Latin America
= CH 14
–
79
When the region is updated, all 8 modulators will be set to
OFF. This way you avoid unwanted channels being
broadcasted by accident.
Tip: to switch off all modulators at once, instead of
selecting them one by one, use the region selection and
select the same region, all modulators will be OFF.
Tap to confirm.
Scroll right to go to next step.
