Johannus symphonica 450, User Manual

Page: 18 / 44

User Manual Symphonica 450 18
Step 0 of the crescendo pedal cannot be changed.
5 JOHANNUS MENU
In the Johannus Menu several functions of the organ can be set.

Press the MENU piston to activate the Johannus Menu on the display.

Navigating the menu is done with the - and + pistons.

Confirmation of a choice is done with the SET piston.

Cancel or step back in the menu is done with the MENU piston.
The Johannus Menu consists of the following functions:
Function More information
Ambiance § 5.1
Crescendo § 5.2
Datadump § 5.3
Demo Songs § 5.4
Expression Pedals § 5.5
Keyboard Config § 5.6
Key Volumes § 5.7
MIDI Config § 5.8
Orchestrals § 5.9
Reset Procedures § 5.10
Reverb Settings § 5.11
Startup Settings § 5.12
Temperaments § 5.13
Tracker Action § 5.14
Tuning § 5.15
Tweeter Settings § 5.16
Version § 5.17
5.1 Ambiance
Adaptive Ambiance System is a function which works with LIVEreverb™ to position the organ
sound in the church. There is choice out of four locations: at the console of the organ, in the
front, in the center or in the rear of the church.
1. Press the MENU piston.
2. Use the - and + pistons to select the
Ambiance
function on the display.
3. Press the SET-piston. The four possible locations appear on the display. The
actual location is indicated by a pointer.
4. Use the - and + pistons to select the desired location.
5. Press the SET-piston to confirm.
6. Press the MENU-piston to exit the Johannus Menu.
5.2 Crescendo
The crescendo pedal contains 20 pre-programmed registrations. These registrations start with
very quiet (pianissimo) to very loud (tutti). These pre-programmed registrations can be
changed.