Johannus Opus 250, User Manual

Page: 18 / 40

User Manual Opus 250/350 18
5 JOHANNUS MENU
In the Johannus Menu several functions of the organ can be set.
Press the MENU piston to activate the Johannus Menu on the display.
Navigating the menu is done with the - and + pistons.
Confirmation of a choice is done with the ENTER piston.
Cancel or step back in the menu is done with the MENU piston.
The Johannus Menu consists of the following functions:
Function More information
Crescendo § 5.1
Datadump § 5.2
Demo Songs § 5.3
Display Contrast § 5.4
Expr. Pedals § 5.5
Keyboard Config § 5.6
Key Volumes § 5.7
MIDI Config § 5.8
Reset Procedures § 5.9
Reverb Settings § 5.10
Startup Settings § 5.11
Temperaments § 5.12
Tuning § 5.13
Version § 5.14
5.1 Crescendo
The crescendo pedal contains 20 pre-programmed registrations. These registrations start with
very quiet (pianissimo) to very loud (tutti). These pre-programmed registrations can be
changed.
1. Press the MENU piston.
2. Use the - and + pistons to select the
Crescendo
function on the display.
3. Press the ENTER piston. The first step of the crescendo
pedal appears on the display.
4. Use the - and + pistons to select the step which has to
be changed (for example step 5).
5. Change the registration and press the ENTER piston to
save the new registration in the memory of the organ.
6. Repeat steps 4 and 5 if more crescendo pedal steps has
to be changed.
Step 0 of the crescendo pedal cannot be changed.
Johannus Menu:
Crescendo
Johannus Menu:
Crescendo
Crescendo
Cres. step: 0
Crescendo
Cres. step: 5