14
4.4
Factory intonation
Saving the intonation settings
1. Connect a PC to the organ. Use the MIDI SEQ. output, see § 3.5.
2. Save the intonation settings on the PC using the intonation program from
Johannus.
Restoring the factory intonation
1. Switch the organ off.
2. Press pistons 1 and 8 in. Hold the pistons down.
3. Switch the organ on.
4. Wait until the lamp in the 0 piston lights.
5. Release pistons 1 and 8.
4.5
Stops
The stops are activated with rocker switches or through the stop memory..
See § 4.11.1. The lamp in the rocker switch goes on when the associated
stop is active.
The stops are divided into three groups:
Pedal stops
: Select the stops controlled by the pedal organ.
Great stops
: Select the stops controlled by the great organ.
Swell stops
: Select the stops controlled by the swell organ.
Choir
: Select the stops controlled by the Choir stops.
4.6
Couplers
Manual coupler
: Couples all of the keys for the swell stops to the great
stops. To activate the manual coupler, use the swell stop - great stop,
choir, great stop or swell stop - choir (only for an organ with three
keyboards).
Pedal coupler
: Couples all of the keys for the great stops or the swell
stops to the pedal. Use the great stops - pedal or swell stops - pedal to
activate the pedal coupler.
To save the intonation settings, you need the Johannus intonation
program.
The current intonation settings will be lost if the settings are not
saved on a PC.
