Johannus LiVE III AGO, User Manual

Page: 12 / 52

User Manual LiVE III AGO 13
2 INSTALLATION
Installation and connection
2.1.1
Installation organ
1. Position the organ on a stable, horizontal surface.
2. Lean the organ slightly backward.
3. Slide the pedal board (C) against the organ.
4. Set the organ upright.
5. Place the organ bench (B) over the pedal board (C).
6. Make sure the voltage of the organ matches the voltage of the main. See the
serial plate (A).
7. Connect the organ to a grounded power socket.
8. Perform a pedal contact calibration. See § 2.1.2.