Johannus Ecclesia T-25, User Manual

Page: 13 / 26

Operation
Operation - 4 - the
JOHANNUS
revolution
Couplers

Manual couplers :
Swell – Choir:
Fully couples all keys of the Swell to the Choir.
Swell – Great:
Fully couples all keys of the Swell to the Great.
Choir – Great:
Fully couples all keys of the Choir to the Great.
 Pedal couplers :
Choir – Pedal:
Fully couples all keys of the Choir to the Pedal.
Great – Pedal:
Fully couples all keys of the Great to the Pedal.
Swell – Pedal:
Fully couples all keys of the Swell to the Pedal.

Manual Bass (MB) : Couples the pedal monophonically to the Great. Only the lowest
note played on the Great is coupled from the pedal to the Great. Enable the Manual
Bass using the MB button.
If only the lowest tone of a chord is released, the tone activated by the MB mode is lost
until a new lowest tone is played. This should prevent annoying ‘jumping’ of the MB
tones.

Cantus Firmus (CF) : Couples the Swell monophonically to the Great. Only the highest
tone played on the Swell is coupled to the Great. Enable the Cantus Firmus using the
CF button.
If only the highest tone of a chord is released, the tone activated by the CF mode is lost
until a new highest tone is played. This should prevent annoying ‘jumping’ of the CF
tones.

Keyboard transfer : Stop on the Choir switching the manual with the Great manual. The
stops on the Choir can now be played on the Great manual and the stops on the Great
can be played on the Choir manual.
Accessories

Chorus (CH) : Is a mode for slightly detuning the organ stops for a broader and livelier
sound. Use the CH button to activate the Chorus.

Fix Accessories (FA) : This is a mode for fixing accessories. As long as this button is
enabled, the couplers and tremulants can only be switched on and off manually.

Reeds Off (RO) : This is a mode for switching off all reeds at once . No reeds can be
enabled as long as this button is pressed. When switching off this mode, the reeds that
were on are activated again. Enable the Reeds Off mode using the RO button.
 General Crescendo pedal (CR) : This is a mode for switching the General Crescendo
pedal on and off.
 All Swells to Swell (S/S) : This mode replaces all swells with one swell, being the swell
of the Swell.