Jofel JET-SMART AA24050, Installation Manual, Page: 5 / 80

EN
JOFEL INDUSTRIAL S.A. C/ La Rioja nº3 Alicante, España www.jofel.com Pag.5
JET SMART HAND DRYER
3. INSTALLATION
For correct installation, please follow the next steps:
1- Remove back cover. Break die-cut opening, which is designed to pass power cord through and
screw it to connection strip. Screw duct provided as a protection to prevent cord to be pulled
accidentally.
NOTICE: Power cord is not supplied with the device, it must be installed by a qualified technician.
Cable MUST BE TYPE H05RN-F 2 x Ø 1.5mm.
Connecon strip for
power cord to network
230V 50Hz
Restraint
system for
power cord
(an-pull
protecon)
POWER CORD H05RN-F
2 x Ø 1.5mm