Oxford
®
UltraFine / UltraFine Lite Straight Leg Sling
English
3
Ensure the sling positioning handles and label are
on the outside and feed the sling down the back
of the client, leaving the lower edge of the sling
body at the base of the spine. Check the sling is
square at the shoulders.
Move the hoist into position before crossing over
the leg straps and attaching to the hoist on the
front hooks of the spreader bar. An integrated
modesty loop on the leg section is also available
for increased patient dignity.
2
3
1
Raise the client’s leg and carefully feed the leg
section under and up between the legs. Ensure
that the sling is positioned comfortably and not
twisted or creased under the thigh. Repeat this
procedure for the other leg.
Ensure the sling remains comfortable under
the legs and raise the hoist slightly if required
before attaching the shoulder straps to maintain
an upright seated position. The hoist may move
towards the client as you do this. When reseat
-
ing the client, use the sling positioning handles
to help achieve a safe and comfortable position.
NOTE:
Sling positioning handles are designed
for turning a patient only and must not be used
for lifting.
4
Fitting the Sling from a Seated Position
WARNING - DETACHABLE SLING STRAPS
If your sling has detachable straps, it is critical to ensure they are securely attached to the sling prior
to lifting a patient. Failure to do so may result in injury to the patient and/or care giver.
Feed each individual strap through the colour-coded loop on the sling. Next, feed the strap through
the ‘D’ ring and pull it back on itself. Ensure the strap is securely attached to the sling and repeat
for remaining straps.
