Joerns Oxford Adaptive Power Cradle, User Instruction Manual & Warranty

Page: 9 / 18

Oxford
®
Adaptive Power Cradle
9
English
Charging Instructions:
To charge the battery, follow the instruction below:
1. Remove the battery from the cradle (see fig. 11). The battery is retained by a magnetic force.
Simply pull the battery straight out of the control box on the cradle.
2. Connect the power lead into the charger.
3. Place the battery in the charging unit (see fig. 12). The battery is held in place by a magnetic
force and will automatically align itself in the charger unit.
4. Plug the charger into the mains power outlet (see fig. 13). An amber light will illuminate,
indicating there is power to the charger.
5. A green light will begin to “flash” indicating that the battery is being charged. The amber light
remains constantly illuminated.
6. Once the green indicator light stops flashing and remains illuminated, the battery is fully
charged and may be returned to service.
7. To return the battery to service, switch off (UK/EU) the mains supply and remove the battery
from the charging unit. Fit the battery into the control box on the cradle. One long “BEEP” will
indicate that the battery has been properly placed in the control box and the cradle is ready
for use.
NOTE: Ensure the batteries are fully charged prior to using your 4-point Adaptive Power
Cradle for the first time.
NOTE: The cradle will sound a single “beep” after the battery has been removed. The
“beep” will occur on a regular interval for several hours.
WARNINg!
• KEEP the battery fully charged. Place the battery on charge whenever it is not in use.
If it is more convenient to do so, place on charge every night. The charger WILL NOT
allow the battery to overcharge.
• Battery or charger is not to be opened by unauthorized personnel. (Contact Joerns
Healthcare or your distributor for warranty and repairs).
• Do not touch battery/charger terminals.
Fig. 11 Fig. 12 Fig. 13
(UK version shown)