Joe Due Z10, Operating Manual, Page: 7 / 37

7 / 37
OperatingManualZ10/Z20/Z30
5. Declaration of conformity
Joe Due Blades & Equipment, Inc..
N5437 US Hwy 12 & 16
Mauston, WI 53948
declares under its sole responsibility that the following machine
Z10 / Z20 / Z30
included in this declaration, follows the provisions of the:
EN ISO 12100:2010
EN 60204-1:2006/AC:2010
EN 61000-6-2:2005/AC:2005
EN 61000-6-4:2007/A1:2011
according to
Machine Directive 2006/42/EC
Low Voltage Directive 2006/95/EC
EMC Directive 2014/30/EU
2018.05
Joe Due Blades & Equipment, Inc..
6. Warranty
Joe Due Blades & Equipment, Inc.. offers to its customer the vacuums and accessories a
12-month factory warranty for material and manufacturing defects.
In the event of any complaint, the machine or agreed part must be returned to us or our
authorized representative for a warranty examination and for any warranty repair or
replacement. And the machine or parts must be sent to us carriage free unless otherwise
agreed.
A warranty repair shall be conducted in aJoe Due Blades & Equipment, Inc.. facility only or in an
authorized Technical Support Centre. If the repair claims appear warranty invalid, the costs
relating to repair and/or replacement of parts shall be charged to the buyer.
The warranty does not cover defects which are the result of normal wear and tear, negligence,
defective use, unauthorized repair or the vacuums being connected to the incorrect voltage.
The warranty shall be invalidated in the event of the machine having been repaired by
unauthorized person or its serial number has been removed or altered.