18
CHANGING NEEDLE
INSERT “DARNING PLATE“
Warning:
Before changing
the pin please adjust main
control switch to (O)
.
1. Raise the needle bar to its highest
position.
2. Loosen needle clamp screw and
remove the old needle.
3. With the flat side of the needle facing
away from you, insert the needle as
far up as it will go.
4. Tighten the needle clamp screw
securely.
Sometimes you will want to control the
feeding of fabric yourself. Turn the needle bar
to its highest position and raise the presser
foot over the needle plate, aligning two pins of
the darning plate with holes of needle plate.
You may then determine the movement of the
fabric by yourself. See page 24 for button
sewing application.
Needle clamp screw
Tighten
Face flat side away from you
Loosen
