1. Clean the parts of the refrigerator with lukewarm water containing a little neutral detergent
and with clear water, and wipe them dry.
TESTING
Notes: Electric parts of the refrigerator can only be wiped by dry cloth.
2. Turn the thermostat knob to the "3" position, turn on electricity. The compressor and the
light inside the refrigerator begin to work.
3. Close the door 30 minutes later, if the temperature decreased obviously, it shows that the
refrigerator system works well. When the refrigerator operates for a period of time, the
temperature controller will automatically set the temperature within limits it opens.
4. If the above steps are successful, the trial operations finish. The refrigerator works normally.
1. The temperature in the refrigerator compartment is controlled by the temperature controller
installed on the side wall of the refrigerator.
TEMPERATURE CONTROL
2. Turn the thermostat knob to right or left, you can regulate the temperature inside the
refrigerator.
3. The marks on the knob are the temperature grades, not the exact number of the degrees of
temperature.”0” shows a forced STOP and “7” shows the lowest temperature. Turn the
knob from "1"position to "7"position, the temperature decreases continuously. You may set
the temperature control selector to any position according to what you need.
4. Please set the selector to "3" position in normal use, always depending on the Refrigerator
food storage.
-16-