Warning:
To avid over heating, do not cover the heater.
A. STRUCTURE
B. ASSEMBLY
Place the legs at the bottom of heater in the first and last fins and screw them on. Shown as
following figure 1.
ASSEMBLY WITH STANDS
•
Before fixing heater on a wall, be sure that once unit installed it must be kept at a minimum
distance (shown in figure 2) from any objects (side wall, floor, furniture, ect.).
WALL MOUNTING
•
Then make 2 holes H1, H2 (diameter: 10mm; depth:60mm) in the wall, the location dimensions
of the holes are vary depending on the model of heater that you have bought. The dimensions
are as follows:
Model
a (mm)
b (mm)
e (mm)
f (mm)
JET-650
415
73
220
495
JET-1000
565
73
372
495
JET-1250
715
73
524
495
-18-
Figure 1
Figure 1
Control panel
Radiating fins
Power switch
Temperature sensor
Stands
