2 Used as wall-mounted
Distance between fixing dots
T. EMITTER
4
5
8
L1 (mm)
242
322
562
L2 (mm)
242
322
562
1
– Drill holes according to the instructions of fig. 2
2
– Place the tubes into the holes of the wall.
3
– Set up grips with screws (Fig. 4)
4
– Place the T. Emitter on the upper grips
5
– Place the down grips to maintain the appliance against the wall.
6
– Screw down grips down with screws.
CAUTION:
Before
starting the appliance, make sure it’s Wall-mounted correctly. If it’s not parallel to the
floor, technical problems can occur.
Control panel and LCD screen
Control panel:
There are a total of 5 buttons on the control panel as follows:
- Power standby switch
- Date and time settings; Timer settings; Changes the working mode
- Select running mode; Set program;
- Increase
- Decrease
-30-
Fig.2 Fig.3 Fig.4
