52
Over-Temperature Protection
A temperature sensor equipped can monitor the temperature inside the ceramic hob. When
an excessive temperature is monitored, the hob will stop operation automatically. A
temperature sensor equipped can monitor the temperature inside the ceramic hob. When an
excessive temperature is monitored, the hob will stop operation automatically.
Residual Heat Warning
When the hob has been operating for some time, there will be some residual heat. The letter
“H” appears to warn you to keep away from it.
Auto Shutdown
Another safety feature of the hob is auto shutdown. This occurs whenever you forget to switch
off a cooking zone. The default shutdown times are shown in the table below:
Power level
1
2
3
4
5
6
7
8
9
Default working timer
(hour)
2
2
2
2
2
2
2
2
2
Using the Timer
You can use the timer in two different ways:
•
You can use it as a minute minder. In this case, the timer will not turn any cooking zone
off when the set time is up.
•
You can set it to turn one cooking zone off after the set time is up.
•
You can set the timer up to 99 minutes.
Using the Timer as a Minute Minder
NOTE:
you can use the minute minder even if you’re not selecting any cooking
zone.
If you are not selecting any cooking zone:
1.
Make sure the cooktop is turned on.
2.
Touch the controls of the timer, the minute minder indicator will flash.
3.
Set the time using the slider sensor.
4.
If the setting time exceeds 99 minutes, the timer will automatically return to 0 minute.
5.
When the sensor slider has been set to “-”, the timer will turn off.
6.
When the time is set, it will begin to count down immediately. The display will show the
remaining time and the timer indicator will flash for 5 seconds.
