JOBSITE SYSTEMS
12331 SW 130 STREET
MIAMI, FL 33186
P
866.4JB.SITE (866.452.7483)
F
305.238.0185
WWW.JOBSITESYSTEMS.COM
©2007 JobSite Systems. All rights
reserved. JobSite, Pure Custom and Niles
are registered trademarks of Niles Audio
Corporation and the JobSite Logo is a
trademark of Niles Audio Corporation. All
other trademarks are the property of their
respective owners. CS0171A
Specifications subject to change without notice.
PREPARING FOR INSTALLATION:
While the IR-KIT MKII is compatible with most brands of audio/video
components, there are a few exceptions. You should perform a temporary
hookup to test for compatibility before you conceal wire or permanently
mount any parts.
INSTALLATION:
1. Place the IR-CB2 connecting block so that the emitter wires will reach the
components.
2. Place the IR-SMR MKII receiver in a convenient location near the television.
3. Insert each wire of the IR-SMR MKII receiver into the appropriate hole on
the removable connector plug of the IR-CB2 connecting block and snap
the locking tabs down. Insert the connector into the socket of the IR-CB2
connecting block.
4. Plug the emitters into the sockets labeled EMITTER OUTPUTS on the
IR-CB2 Connecting Block.
5. Position the emitters on each component’s IR sensor window using the
adhesive backing on the emitter.
6. Plug the connector on the supplied 12VDC power supply into the socket
labeled POWER on the IR-CB2 Connecting Block and then plug the power
cord into an electrical outlet.
7. To control your audio/video components, simply aim your remote control at
the IR-SMR MKII surface mount receiver.
IR-KIT MKII INSTALLATION DIAGRAM
LCD/PLASMA PROOF IR REPEATER KIT
IR-KIT MKII
Summary of Contents for IR-KIT MKII
Page 4: ......