8
a) Maintain a firm grip on the power tool and position your body and arm
to allow you to resist kickback forces. Always use auxiliary handle, if
provided, for maximum control over kickback or torque reaction during
start-up. The operator can control torque reactions or kickback forces,
if proper precautions are taken.
b) Never place your hand near the rotating accessory. Accessory may
kickback over your hand.
c) Do not position your body in the area where power tool will move if
kickback occurs. Kickback will propel the tool in direction opposite to
the wheel’s movement at the point of snagging.
d) Use special care when working corners, sharp edges etc. Avoid
bouncing and snagging the accessory. Corners, sharp edges or
bouncing have a tendency to snag the rotating accessory and cause
loss of control or kickback.
e) Do not attach a saw chain woodcarving blade or toothed saw blade.
Such blades create frequent kickback and loss of control.
4.
APPLICATION
：
1. Cutting various types of wood.
2. Cutting various decorative boards, thin plastic boards, and mnew types of
building materials which are soft(use a saw blade for plastic)
3. Cutting thin aluminum sheets.
4. Cutting nonmetallic materials such as slete gypsum bord, cemented excelsior
boart, etc.
MOUNTING AND DISMOUNTING THE SAW BLADE
CAUTION: To avoid serious accident, ensure that the switch is in the OFF position
and power source is disconnected.
*DISMOUNTING THE SAW BLADE
1. Set the cutting depth to maximum and place the circular saw on a stable place.
2. Keeping the lock lever depressed, carefully tum the bolt with the supplied wrench.
