JOBO GIGA ONE, Instruction Manual, Page: 8 / 16

8
2.2. Disconnecting GIGA ONE
2.2.1. For Windows 2000 and XP
1. Left click on the `Unplug or Eject Hardware` or `Safely Remove Hardware` icon
in the Windows system tray ( green arrow icon on right of your task bar ).
2. Select `stop USB Mass Storage Device`( for Windows 2000 ) or `Safely Remove
USB Mass Storage Device` ( for Windows XP ) and confirm.
2.2.2. For Windows ME
1. Left click on the `Unplug or Eject Hardware` icon in the Windows system tray (
green arrow icon on right of your task bar ).
2. Select `stop USB Disk- Drive ( F: ) ` ( or the appropriate drive letter ) and con-
firm.
The GIGA ONE appears as three separate drivers in this Windows ME system tray
icon, so go through steps 1 and 2 two more times until all three drives are discon-
nected.
2.2.3. For Windows 98/ 98SE
1. Open `My computer Control Panel System Device Manager`, right click on the
GIGA ONE and select `remove`, then disconnect your GIGA ONE.
Note:
Unplug the USB cable only when prompted or there is no data transfer
evident. If not, you may damage your data in GIGA ONE. Should this happen, you
may use the Windows scandisk utility and attempt to repair any damaged data on
the hard disk.