13
GB
3. Connect to the PC
3.1. Minimum systems requirements
- Microsoft Windows TM 98/ Me/ 2000/ XP, MacOS 10.2 or higher, Linux 2.4.x or
higher
- CD-ROM drive
- Pentium2, 400 MHz
- RAM 32MB (Windows ME, 2000) – 64MB (Windows XP)
- 20MB hard disk memory
- USB interface
3.2. Driver Windows 98/ME/XP/VISTA, Linux 2.4.x,
MacOS 10.2.x
For these operating systems no drivers are required. Please, make sure that you
have installed the most recent Service Packs of the operating systems in question.
3.3. Log off GIGA ONE ULTRA under Windows
Windows 2000/ME/XP users click on the ‚Remove or eject hardware’ symbol in the
bottom right-hand corner of the systems tray (next to the clock). Now select ‚USB
mass memory’ and click on the ‚End’ button.
Windows 98 users must use the ‚Device Manager’ to log off GIGA ONE ULTRA. Find
the GIGA ONE ULTRA in the ‘Device Manager` and click on the name with the right-
hand mouse key. After having selected ‚Remove’ you can disconnect GIGA ONE
ULTRA from your PC.
3.4. GIGA ONE ULTRA format for hard disks
The hard disk of GIGA ONE ULTRA is factory-formatted.
GIGA ONE ULTRA is a hard-disk based product. In the event of malfunctions the
internal hard disk can be reformatted.
It is imperative that this is done in the FAT32 format.
For Windows XP you need the program „Swissknife“ or „FAT32API.exe“ in order to
do the formatting. You will find the „FAT32API.exe“ program under www.jobo.com
(GIGA ONE ULTRA formatting program) and „Swissknife“ on the enclosed driver CD.
Summary of Contents for GIGA ONE ULTRA
Page 1: ...GIGA one ultra Instruction Manual ...
Page 2: ...2 ...