4
The device is not set up on a thick carpet or bed;
Direct heat sources (e.g. heating) do not affect the device;
The device is not exposed to direct sunlight;
Contact with sprayed and dripping water is avoided (place no objects filled with
liquids, such as vases, on, above or near the device);
The device is not placed in the immediate vicinity of magnetic fields (e.g.
loudspeakers);
No open fire sources (e.g. burning candles) are positioned on or near the device.
Avoid also foreign bodies entering the device.
Before a storm and/or lightning disconnect the device from the power supply.
Disposal of Old Devices
If this symbol of a crossed out trash can appears on a product, it means
that this product is subject to the European Directive 2002/96/EC. All old
electrical and electronic devices must be disposed of separately from
household rubbish at designates places. With the proper disposal of old
devices you avoid damage to the environment and your personal health.
You can obtain more information on the disposal of old devices by
contacting your municipal administration, the disposal office or the place
where you bought the product.
CAUTION: Notices on Mains Disconnection
In order to disconnect the device fully from the mains power supply, the plug must be
pulled out from the wall outlet. Therefore the equipment should be set up in such a way
that unobstructed access to the wall outlet is always ensured, so that the plug can be
immediately removed in an emergency situation. To avoid the danger of fire, the plug
should always be removed when not being used for a long period of time from the wall
outlet, such as during holidays.
Connect the product as described in the User's Manual.
Follow the instructions in the User’s Manual of your computer.
Place the product away from humidity and avoid wet environments.
Never use this device near water.
Any repair and maintenance of the devices must be performed by qualified service
personnel only. Repair or maintenance is necessary when you observe any kind of
damage (e.g. damaged power cord or plug, when liquids have entered the device,
when objects have fallen onto the equipment, when the device has been dropped,
when the device has been exposed to rain or moisture) or when you observe a
reduced performance of the product.
