jobmate JMCGA18G.9 Safety And Operating Manual Download Page 6

6

chassis has to be connected first. The other 

connection is to be made to the chassis, 

remote from the battery and fuel line. The 

battery charger is then to be connected to the 

supply mains. 

5.  After charging, disconnect the battery 

charger from the supply mains. Then remove 

the chassis connection and then the battery 

connection.

6.  Do not charge a leaking battery.

7.  Do not use chargers for works other than 

those for which they are designed.

8.  Before charging, ensure your charger is 

matching the local AC supply.

9.  The charging device must be protected from 

moisture.

10. Do not use the charging device in the open.

11. Do not short out the contacts of battery or 

charger.

12. Respect the polarity “+/-“ when charging.

13. Do not open the unit and keep out of the reach 

of children. 

14. Do not charge the batteries of other 

manufactures or ill-suited models.

15. Ensure that the connection between the 

battery charger and battery is correctly 

positioned and is not obstructed by foreign 

bodies.

16. Keep battery charger’s slots free of foreign 

objects and protect against dirt and humidity. 

Store in a dry and frost-free place.

17. When charging batteries, ensure that the 

battery charger is in a well-ventilated area 

and away from inflammable materials. 

Batteries can get hot during charging. 

Do not overcharge any batteries. Ensure 

that batteries and chargers are not left 

unsupervised during charging. 

18. Do not recharge non-rechargeable batteries, 

as they can overheat and break.

19. Longer life and better performance can be 

obtained if the battery pack is charged when 

the air temperature is between 18

 and 

24

. Do not charge the battery pack in air 

temperatures below 4.5

, or above 40.5

This is important as it can prevent serious 

damage to the battery pack.

20. Charge only battery pack of the same model 

provided by manufacturer and of models 

recommended by manufacturer.

SAFETY WARNINGS FOR 

BATTERY PACK

a)

  Do not dismantle, open or shred cells or battery pack. 

b)

  Do not short-circuit a battery pack. Do not store 

battery packs haphazardly in a box or drawer where 

they may short-circuit each other or be short-circuited 

by conductive materials. 

When battery pack is not 

in use, keep it away from other metal objects, like 
paper clips, coins, keys, nails, screws or other small 
metal objects, that can make a connection from one 
terminal to another. Shorting the battery terminals 
together may cause burns or a fire.

c)

  Do not expose battery pack to heat or fire. Avoid 

storage in direct sunlight.

d)

  Do not subject battery pack to mechanical shock.

e)

  In the event of battery leaking, do not allow the liquid 

to come into contact with the skin or eyes. If contact 

has been made, wash the affected area with copious 

amounts of water and seek medical advice.

f)

  Seek medical advice immediately if a cell or battery 

pack has been swallowed.

g)

  Keep battery pack clean and dry.

h)

  Wipe the battery pack terminals with a clean dry cloth if 

they become dirty.

i)

  Battery pack needs to be charged before use. Always 

refer to this instruction and use the correct charging 

procedure.

j)

  Do not maintain battery pack on charge when not in 

use.

k)

  After extended periods of storage, it may be 

necessary to charge and discharge the battery pack 

several times to obtain maximum performance.

l)

  Battery pack gives its best performance when it is 

operated at normal room temperature (20 °C ± 5 °C).

m)

  When disposing of battery packs, keep battery 

packs of different electrochemical systems separate 

from each other.

n)

  Recharge only with the charger specified by 

manufacturer. Do not use any charger other 

than that specifically provided for use with the 

equipment. 

A charger that is suitable for one 

type of battery pack may create a risk of fire 
when used with another battery pack. 

o)

  Do not use any battery pack which is not designed 

for use with the equipment.

p)

  Keep battery pack out of the reach of children.

q)

  Retain the original product literature for future 

reference.

r)

  Remove the battery from the equipment when not in 

use.

s)

  Dispose of properly.

Summary of Contents for JMCGA18G.9

















Reviews: