8
Do not allow the cord to hang over the
edge of a table or counter or touch hot
surfaces. The charger should be placed
away from sinks and hot surfaces.
Do not use charger to charge any batteries
other than the circular saw batteries. Other
batteries may explode.
Do not operate charger if cord or plug is
damaged. Replace damaged cord and
plug immediately.
Do not operate charger if it has received a
sharp blow, been dropped or otherwise
damaged in any way. Have a qualified
technician examine the charger and repair
it if necessary. Do not disassemble the
charger.
For best results, only charge the battery
when the temperature range of the battery
or work area is between 10
–40°C (50–
105°F).
Unplug the charger when not in use and
before cleaning or maintenance.
Do not abuse the cord. To reduce the risk
of damage to the electric cord or plug,
never carry the charger by the cord or
yank the cord to pull the plug. Always
grasp the plug and pull to disconnect.
Always keep the cord away from heat, oil
and sharp edges.
BATTERY & CHARGER SAFETY
NOTE:
See Pages 20 & 21 for
detailed information on disposal of
defective batteries and exercising the
battery for peak performance.
