___________________________________________________________________________
______________________________________________________________________________
18
TECH-D manual EN 2010-05-18.doc
HOLD button briefly to freeze the
measurement value. To return, press the
HOLD button again briefly.
5.
Read the measuring arm’s display and
compare the symmetry (cross)
measurement value with the value on the
data sheet.
(It can be advantageous here to enter the
measured value in the data sheet table in
order to create a before or after report.)
Repeat the same procedure on the other side of
the vehicle’s corresponding and selected
symmetry (cross) measurement point
(measuring line no 3).
Note that the vehicle can have different
measurement values for the right and left side,
depending on the design of the vehicle.
