The 4-bay
StorBlade
TM
1U SCSI JBOD enclosure is designed for use with a
host system to provide a high-end storage solution. The following is a summary
of the 4-bay 1U enclosure features:
•
The 4-bay
StorBlade
TM
1U SCSI JBOD Rackmount enclosure is a four
drive enclosure that supports up to four 3.5" LP (Low-Profile) SCA (80-
pin) drives. It supports single-ended, Ultra2 SCSI, and Ultra 160 SCSI.
The SCSI enclosure has two SE/LVD (single-ended/Low Voltage
Differential) Channels.
2/4/6/8/10/12/15-bay Product Family Features
FORTRA
and
StorBlade
TM
are families of high-end enclosures designed for
high-volume performance storage solutions. The following table shows the
features of the FORTRA
2/4/6/8/10/12/15-bay and the
StorBlade
TM
products:
S
Stto
orrB
Bllaad
de
e
TM
SCSI JBOD Installation Guide Rev A
1-1
1. Introduction
2-bay 4-bay
1,3
6-bay
*1,3
8-bay
1
10-bay
*1,2
12-bay 15-bay
*1,3
StorBlade
Number of Device Bays
2
4
6
8
10
12
15
4
Number of Blowers
1
1
1 or 2
2
2
2
2
2
Number of Power Supplies
1
1
1 or 2
2
2
2
2
1 or 2
Number of I/O Channels (SCSI Only)
1
1
2
2
2
2
2
SCSI SE/LVD Supported
2
2
2
2
2
2
2
Fibre Channel Supported
2
2
2
2
2
2
Hot-Swap Canisters
2
2
2
2
2
2
2
2
Removable Power Supplies
2
2
2
2
2
2
2
Fibre only
Removable Blowers
2
2
2
2
2
2
2
Fibre Only
N+1 Power Supplies
2
2
2
2
2
Fibre only
N+1 Blowers
2
2
2
2
2
2
MIA Support (FC Only)
2
2
2
2
Loop Expansion Support (FC Only)
2
2
2
2
2
2
Daisy Chainable (SCSI Only)
2
2
2
2
2
2
Built-in Termination (SCSI Only)
2
2
2
2
Auto Termination (SCSI Only)
2
2
2
2
SAF-TE/SES Ready (Optional)
2
2
2
2
Fibre only
SAF-TE/SES Compatible
2
2
2
2
Fibre only
SCSI to SCSI RAID Support
2
2
2
2
Fibre to SCSI RAID Support
2
2
Fibre to Fibre RAID Support
2
2
2
Fibre to ATA RAID Support
2
SCSI to ATA RAID Support
2
(D)esktop/(T)ower/(R)ackmount
D
D
DTR
T
TR
R
TR
R
* 6/10/15-bay unit features apply to both Tower and Rackmount models
1 Features are based on a standard configuration with no internal host controller(s) installed
2 Fibre channel 10/15-bay enclosures have built-in SES
3 Fibre Channel 2Gb Model available. 2Gb models use SFP transceivers.
