JMPosner ROUND WAFFLE, Instruction Manual

Page: 8 / 12

K. USING YOUR WAFFLE MAKER
1. (The temperature numbers on the display is Celsius.
If using Fahrenheit, please convert Fahrenheit
temperature to desired Celsius) °F = (°C × 1.8) + 32
2. Close the waffle maker and plug into Mains wall outlet.
After pressing the ON/OFF switch on the Display Panel
you will see the display go on, indicating that the Waffle
Maker has power and is ready for preheating. The
power will remain ON until you unplug the unit or switch
the ON/OFF button again.
3. Set the desired temperature for making your waffles by
pressing up or down on the temperature buttons. The
temperature will be displayed on the panel.
4. Until the machine reaches the set temperature the
“warming” light will be on and once the machine
reaches the set temperature the ready light will come
on.
5. The waffle maker is preset to 3 minutes and 30 seconds
standard cooking time. If you would like to adjust the
cooking time press the up/down time adjust buttons.
(NOTE) At the end of the cooking cycle, the timer will
revert back to the standard cooking time of 3 minutes 30
seconds.
6. When the proper baking temperature is reached
the ready light will go off and on periodically, this is
normal and is the Waffle Maker keeping to the desired
temperature.
7. Pour in just enough waffle mix to fill the lower waffle
plate so that the peak areas of the plate are covered.
If necessary, use a spatula to spread the waffle mix into
the corners of the moulds. DO NOT use oil on the plates
as this will create carbon which is hard to remove from a
non-stick surface.
8. Close the Waffle Maker and immediately turn over 180º,
this will automatically start the timer. The Waffle maker
will bleep during the cooking process and will stop
7