background image

3

DO NOT start at a high speed. Start at a low, comfortable speed to 

begin your workout. 
DO NOT stand on the running belt when beginning the exercise. 

Ensure you are standing on the side frames, which are on both 

sides of the running belt.
Use caution when getting on or off the iWalk.
DO NOT use the iWalk if you have a pacemaker or other cardiac 

device.
If pregnant, please consult your doctor before using the iWalk.
DO NOT use when ANY parts of this product are damaged. 
Replace damaged parts immediately with replacement parts from 

JML and only use when repaired by a qualified technician.
Turn off the switch and unplug the power cord when the iWalk is 

not in use.
Keep power cord away from heated surfaces.
Store in a clean and dry place.
ONLY service from a qualified technician.
Run as close as possible to the centre of the belt for safety in the 

direction of the control panel.
DO NOT attempt to run backwards.
DO NOT step or jump off the running belt while the iWalk is moving. 

Slow down and turn off first to to ensure a safe dismount.
When unfolding to use, carefully open and rotate the back of the 

running belt towards the ground as it is heavy.
Ensure the the iWalk is unplugged when lubricating the belt.
Only use the iWalk for its intended use as described in this manual.

The clip of the Magnetic Safety Key must be attached to 

the magnetic part of the control panel, otherwise the iWalk 

Safety Warnings & Advice

Summary of Contents for iWalk

















Reviews: