2
Safety Warnings & Advice
Thank you for purchasing EZ Bed from JML. Please ensure you read these instructions in full
before using your new bed and keep them safe for future reference.
•
NEVER
unfold or inflate EZ Bed in temperatures below freezing and avoid extensive
exposure to the sun.
• Protect from contact with sharp objects and rough ground.
• Make sure to handle the pump with care.
•
DANGER
- To reduce the risk of electric shock. Always unplug this appliance from the
electrical outlet before cleaning.
• Keep out of the reach of children at all times.
• This bed is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or a lack of experience and knowledge, unless they have
been given supervision or instruction concerning use by a person responsible for their
safety. Children should be supervised to ensure that they do not play with EZ Bed.
• Use this appliance only for its intended use as described in this manual.
DO NOT
use
attachments unless recommended for use with EZ Bed.
•
NEVER
operate EZ Bed if it has a damaged cord or plug. If it is not working properly, has
been dropped and damaged, or dropped into water, seek advice from customer services
regarding its repair.
• Keep the power cord away from heated surfaces.
•
NEVER
inflate or use EZ Bed with the air openings blocked. Keep the air openings free of
dust, lint, hair and other obstructions.
•
NEVER
drop or insert any object into any opening.
•
DO NOT
use outdoors. For indoor household use only.
•
DO NOT
operate where aerosol (spray) products are being used or where oxygen is being
administered. Keep the pump away from flammable liquids. The area where the pump is
used should be well ventilated.
• To disconnect, turn all controls to the off position then remove the plug from the outlet.
• Power supply for pump must be 230V AC.
•
DO NOT
leave plugged in when unattended.
•
DO NOT
obstruct the ventilation hole on the pump.
•
DO NOT
open the pump case - electrical hazard may result.
•
DO NOT
over-inflate.
• For proper pump usage: it is recommended not to exceed five minutes of continuous
inflation/deflation time. Pump does not turn off automatically.
• IMPORTANT: Your pump has been designed with a safety feature to avoid overheating. If
your pump stops working during use, please allow 30 minutes before using again.
• In case the pump overheats due to excessive continuous inflation/deflation, the power
will automatically cut-off. The pump cool-down indicator will be on, and will reset to begin
working within 30 minutes. The pump cool-down indicator will be off.
• The pump included in this airbed is thermally protected.
Summary of Contents for EZ Bed 109T
Page 1: ...Instructions ...
