10
VISION PROFILE 250Z RGBW Product Datasheet
10
Ver 2.0
jmazlighting.com
After switching on, the device will automatically detect whether DMX 512 data is received or not. If
there is data received at the DMX input, you will see the DMX indicator light in green.
Universal DMX Control
This function allows you to use a universal DMX-512 controller to control the dimmer and strobe. A DMX
controller allows you to create unique programs tailored to your individual needs.
RDM control
The VISION PROFILE 250Z RGBW can communicate using RDM (Remote Device Management) in ac
-
cordance with ESTA’s American National Standard E1.20-2006: Entertainment Technology RDM Remote
Device Management Over DMX512 Networks.
RDM is a bi-directional communications protocol for use in DMX512 control systems, it is the open stan-
dard for DMX512 device configuration and status monitoring.
The RDM protocol allows data packets to be inserted into a DMX512 data stream without affecting ex-
isting non-RDM equipment. It allows a console or dedicated RDM controller to send commands to and
receive messages from specific fixtures.
With RDM function, you can set the DMX address of your fixtures remotely. This is especially useful
when the device is installed in a remote area.
Each VISION PROFILE 250Z RGBW has a factory set RDM UID (unique identification number).
Before operation, enable RDM function in Advanced settings.
Menu
DMX
Mode
Dimmer
Advance
Rotary Knob function
The knob in the rear panel of the VISION PROFILE 250Z RGBW act as multi function. Including rotary
control of dimmer, up/down/enter function function.
Dimmer & strobe function:
1. Press the button to enter the main menu.
2. Press the or button to select menu and press .
3. Press menu and select sub menu.
4. Press and select or in third menu.
Summary of Contents for VISION PROFILE 250Z RGBW
Page 16: ......
