81900510 Rev. B
©2019 JMA Wireless. All rights reserved. This document contains proprietary information. All products, company names, brands, and logos are trademarks™ or
registered® trademarks of their respective holders. All specifications are subject to change without notice. Revised: July 8, 2019
+1 315.431.7100 [email protected]
Installation Guide
Venue Brackets
Instructions for Mounting Kits 919050, 919055, & 91900313
Kit #919050
Item
#
JMA part #
Description
Qty.
in kit
1
411-144-0732-VS
10-32 x 1/2” HEX Head Bolt
SS
2
2
411-144-1348-VS
3/8”-16 x 1.000” HEX HEAD
BOLT FULL THRE
4
3
412-105-0907-VS
1/4”-20 HEX NUT SS
4
4
413-011-1699-VS
1/4 FLAT WASHER SS
4
5
413-011-2421-VS
3/8” FLAT WASHER SS
(OD 13/16)
4
6
413-011-8518-VS
#10 FLAT WASHER SS
2
7
413-012-1659-VS
1/4 SPLIT LOCK WASHER SS
4
8
413-012-2489-VS
3/8 SPLIT LOCK WASHER SS
4
9
413-012-6789-VS
#10 SPLIT LOCK WASHER
SS
2
10
457216-PF
Wall / Pipe Mount Stadium
Bracket
1
11
457217-PF
Center Mount Stadium
Bracket
1
12
457218-PF
Antenna Mount Stadium
Bracket
1
13
81900510
Assembly instructions
1
Other key details:
The brackets were designed to handle pole diameters ranging from
2.5 to 4.5 inches.
All 10-32 hardware to be torqued to 30 lbf∙in (3.39 N∙m).
All 3/8” hardware to be torqued to 20 lbf∙ft (27.12 N∙m).
All 1/4” hardware to be torqued to 75 lbf∙in (8.47 N∙m).
Fasteners / hose clamps for wall mount and pole mount not
included in 919050 bracket kit. (Sold separately)
Below is the bracket kit pre-installed on the antenna.
4
5
Venue bracket details.
Bracket 12 can be re-oriented 90° to support vertical mounting
configurations. Keep the word “top” on the antenna facing top, and the
weep hole facing down. Use Screw 1 for locking bracket into specific
angle positions. Torque to 30 lbf∙in (3.39 N∙m). Use the holes in Bracket
10 (4.50” [114.3 mm] apart @ CL) and 3/8” hardware for wall mounts.
Figure 3: Bracket details
