10
Set up options
I
nsert the safety key into the
corresponding socket.
1. Without anyone on the treadmill,
plug the power cable.
2. Switch on the treadmill. Power
switch is under the front end of
the machine. The control panel will
light up and all the figures in the
window will go to ZERO.
3. Introduce the weight that you can
see flashing on the right side of the
screen using the SPEED button.
4. Press the START button and the
motor will work at the speed
of 0.3 km/h.
5. Press the FAST and SLOW
button to increase or decrease the
speed.
6. Press the UP and DOWN button to
increase or decrease the incline.
7. Press the STOP button to stop the
machine.
8. Put
the
music
with
MP3
format into a USB flash drive
and insert it into the USB
socket. On the treadmill press PLAY/
PAUSE to play the music. Change
the track with SOUND-/LAST
and SOUND+/NEXT buttons. For
adjusting the volume, press and
hold SOUND-/LAST or SOUND+/
NEXT buttons.
Use the following
instructions to
set up the units settings
Time display range
0:00 - 99:59
Distance range
0 - 9.999 km.
Total distance memory
Pulse display range
50 - 230 ppm
Calorie display range
0 - 999 Kcal
Maximum user weight 120 kg, 18.8 St or 264 lb.
Programmes
15 automatic programmes
Incline range
20 levels (= 12%)
Speed range
0.3 - 16 km/h
(0.18 - 10 mph)
Speed direct choice
5 and 8 km/h
Speaker
High-fidelity stereo speaker
Music
MP3, USB audio interface and
Bluetooth connection
Fold/Unfold the treadmill
Fold
: Before fold the treadmill. Remove the
secure locks place on both sides of the running
deck. Hold the end of the running deck, by the
side frames/rails, and lift it until the machine gets
an upright position and you hear a click from the
security lock clasp.
Unfold
: Press the security lock clasp with your
foot. Push the running deck down, holding it by the
side frames. The running deck will go down slowly
thanks to the hydraulic system. Fasten the secure
locks place on both sides of the running deck.
www.jllfitness.co.uk www.jllelectronics.co.uk
• Stand on the side frames.
• Do not stand on running belt.
When starting unit.
