JLG Skytrak 6036, Operation & Safety Manual

Page: 99 / 188

Section 5- Attachments
5-19 31211018
Installation Procedure:
• Refer to “Attachment Installation” on page 5-10.
Operation:
• Approach load with forks centered on load and stop telehandler.
• Level telehandler before side tilting carriage to engage load.
• Side tilt carriage to left or right to align forks with load and engage load.
• Raise load slightly and level carriage side to side.
• Travel in accordance with requirements set forth in
Section 1- General Safety Practices.
Equipment Damage Precautions:
• Do not use forks as a lever to pry material. Excessive prying forces could damage forks
or machine structure.
• Do not attempt to lift loads that are attached or connected to another object.
WARNING
CRUSH HAZARD. Do not use side tilt to push or pull objects or load. Failure to comply
could cause object or load to fall.