JLG Skytrak 3013, Operation & Safety Manual

Page: 118 / 136

Section 7 - Lubrication and Maintenance
7 - 16 31211476
Engine Cooling System
A. Engine Coolant Level Check
1. Perform “Shut-Down Procedure” on page 4 - 4.
2. Open the engine cover.
3. Check coolant level in surge tank (
1
). When coolant is hot, the tank should be
1/2 to 3/4 full. When coolant is cool, bottle should be 1/4 to 1/2 full.
4. If coolant is low, allow fluid to cool.
5. Remove surge tank cap ( 2 ) slowly. Add coolant as required.
6. Replace overflow bottle cap.
7. Close and secure the engine cover.
50
OW0980
OW10 7 0
1
2
ON0690