JLG Skytrak 3013, Operation & Safety Manual

Page: 64 / 136

Section 4 - Operation
4 - 4 31211476
Normal Engine Operation
• Observe instrument panel frequently to be sure all systems are functioning properly.
•
Be alert for unusual noises or vibration.
When an unusual condition is noticed, park
machine in safe position and perform shut-down procedure. Report condition to your
supervisor or maintenance personnel.
•
Avoid prolonged idling.
If the engine is not being used, turn it off.
• When operating a machine at high altitudes, a decrease in machine performance may
occur due to a decrease in air density. When operating a machine at high
temperatures, a decrease in machine performance and an increase in engine coolant
temperature may occur. Contact JLG for operation under abnormal conditions.
Shut-Down Procedure
When parking the telehandler, park in a safe location on flat level ground and away from
other equipment and/or traffic lanes.
1. Apply the park brake.
2. Shift the transmission to “Neutral.”
3. Lower forks or attachment to the ground.
4. Operate engine at low idle for 3 to 5 minutes. DO NOT over rev engine.
5. Shut off engine and remove ignition key.
6. Exit telehandler properly.
7. Turn off electrical master switch (
1
).
8. Block wheels (if necessary).
1
ON0230