SECTION 7 - BASIC ELECTRICAL INFORMATION & ELECTRICAL SCHEMATICS
31215031
7-7
3.
After all required contacts have been inserted, the
wedge lock must be closed to its locked position.
Release the locking latches by squeezing them inward
4.
Slide the wedge lock into the housing until it is flush
with the housing (See Figure 7-9.)
Figure 7-7. Connector Assembly Figure 2
Figure 7-8. Connector Assembly Figure 3
Figure 7-9. Connector Assembly Figure 4
Go
to
Discount-Equipment.com
to
order
your
parts
