SECTION 3 - MACHINE CONTROLS AND INDICATORS
3-22
31215015
5.
AC Generator Indicator (If Equipped)
Indicates the generator is in operation.
6.
Creep Speed Indicator
When the Function Speed Control is turned to
the creep position, the indicator acts as a
reminder that all functions are set to the slowest speed. The
light will be on continuously if the operator selects creep
speed or if the control system puts the machine into creep
speed. In addition, if the control system puts one or more
individual functions in creep speed, the indicator flashes
when that function is selected.
7.
Enable Indicator/Footswitch
To operate any function, the footswitch must be
depressed and the function selected within
seven seconds. The enable indicator shows that the controls
are enabled. If a function is not selected within seven sec
-
onds, or if a seven second lapse between ending one func
-
tion and beginning the next function, the enable light will
go out and the footswitch must be released and depressed
again to enable the controls.
Releasing the footswitch removes power from all controls
and applies the drive brakes.
TO AVOID SERIOUS INJURY, DO NOT REMOVE, MODIFY OR DISABLE THE FOOTSWITCH
BY BLOCKING OR ANY OTHER MEANS.
8.
Fuel Level Indicator
Indicates the level of fuel in the fuel tank.
9.
Glow Plug/Wait to Start Indicator
Indicates the glow plugs are operating. After
turning on ignition, wait until light goes out
before starting engine.
10.
Engine Emissions System Failure Indicator
Indicator illuminates when there is a fault with
the Emissions After Treatment system.
11.
Platform Overload Indicator
Indicates the platform has been overloaded.
F
½
E
To
order
go
to
Discount-Equipment.com