JLG 2505H, Operation Manual

Page: 90 / 160

Section 5 - Attachments and Hitches
5-6 31200743
Sample Capacity Chart (ANSI & CE)
Note: This is a sample capacity chart only ! DO NOT use this chart, use the one located in your
operator cab.
WARNING
TIP OVER HAZARD. All loads shown on rated capacity chart are based on machine
being on firm ground with frame level (see page 4-6); the forks being positioned
evenly on carriage; the load being centered on forks; proper size tires being properly
inflated; and the telehandler being in good operating condition.
OA L 1771
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
X
XX XX XX XX XX XX XX
XX
XXXX XXXX
0°
10°
20°
30°
40°
50°
60°
70°
B
D
A
C
E
1
XX
+
= XXX XX MAX
XXXX
XXXX XX
XXXX XX
XXXX XX
XXXX XX
XXXX XX
XXX
This Capacity Chart may be used with this model ONLY.
The telehandler model is indicated on the boom or chassis. Model
XXXX is used for demonstration purposes only.
Boom Angle
Load zones indicate the
maximum weight that may
be safely lifted.
Load center must be
equal to or less than
value shown.
Attachment type,
weight and
dimensions must be
equal to or less than
the data shown.
Boom
Extension
Indicator
(arc)
Quick Attach Type
Blank = Standard
Quick Attach
UQC = Universal Quick
Attach