SECTION 4 - MACHINE OPERATION
3121165
– JLG Lift –
4-1
SECTION 4. MACHINE OPERATION
4.1
DESCRIPTION
This machine is a self-propelled aerial work platform on
top of an elevating ‘scissor’ mechanism. The Scissor Lift’s
intended purpose is to position personnel with their tools
and supplies at positions above ground level. The
machine can be used to reach work areas located above
machinery or equipment positioned at ground level.
The JLG Scissor Lift has a primary operator Control Sta-
tion in the platform. From this Control Station, the operator
can drive and steer the machine in both forward and
reverse directions, raise and lower the platform and, if
equipped, operate the powered deck extension. The
machine has a Ground Control Station which will override
the Platform Control Station. Ground Controls operate lift
up and down. Ground Controls are to be used only in an
emergency to lower the platform to the ground should the
operator in the platform be unable to do so.
NOTE: All platform extension capacities are 250 lb (120 kg).
Table 4-1. Capacities
MODEL
ANSI/CSA
CE INDOOR
CE OUTDOOR
AUSTRALIAN
INDOOR
AUSTRALIAN
OUTDOOR
Max
Capacity
Max
Persons
Max
Capacity
Max
Persons
Max
Capacity
Max
Persons
Max
Capacity
Max
Persons
Max
Capacity
Max
Persons
1930ES
500 lb
(227 kg)
2
230 kg
2
120 kg
1
230 kg
2
120 kg
1
2030ES
800 lb
(363 kg)
2
360 kg
2
160 kg
1
360 kg
2
160 kg
1
2630ES
single cap
500 lb
(227 kg)
2
230 kg
2
N/A
N/A
230 kg
2
N/A
N/A
2630ES
dual cap.
to 20 ft
800 lb
(363 kg)
2
360 kg
2
N/A
N/A
360 kg
2
N/A
N/A
2630ES
dual cap.
to 26 ft
500 lb
(227 kg)
2
230 kg
2
N/A
N/A
230 kg
2
N/A
N/A
2646ES
1000 lb
(454 kg)
2
450 kg
2
230 kg
2
450 kg
2
230 kg
2
3246ES to
26 ft.
1000 lb
(454 kg)
Zone A
2
450kg
2
320 kg
1
320 kg
2
320 kg
1
3246ES to
32 ft.
700 lb
(317 kg)
Zone B
2
320 kg
2
320 kg
1
320 kg
2
320 kg
1