8
Configuring the Ethernet Interface
The Compact Ethernet Interface Card comes from the factory
preconfigured to work in the Eclipse MXL. However, you will
most likely need to configure the network settings to work on your
network.
1.
Access the configuration web page. The factory default
address in 192.168.200.114.
Note: If the IP address of the unit is not known, you can reset the
Ethernet Interface settings to a known state. This is done by pressing
and holding the Mute8, Solo8 and Aux8 buttons during power up. The
Ethernet Interface will then be set to:
IP address = 192.168.200.114
Subnet Mask = 255.255.255.0
Password = disabled.
You must power cycle the unit for the settings to take effect.
