TROUBLESHOOTING
FITTING
Instructional videos at: JLABAUDIO.COM
ECHOES ON CALLS
If you experience microphone echo/call quality with the JBuds Air, make sure the Cush Fin is not blocking the microphone port.
Microphone open
Microphone covered
Try all the optional Cush Fins and
ear tips for best fit and proper
seal.
The Cush Fin should be aligned by
positioning the contour around the
microphone hole.
Cush Fin™
Ear tip
TROUBLESHOOTING
NO AUDIO IN LEFT EARBUD OR EARBUDS ARE DISCONNECTED
FROM EACH OTHER (MANUAL RESET)
Bluetooth
Settings
JLab JBuds Air
i
Enter your Bluetooth device settings
and forget the JBuds Air.
Take both earbuds out of the charging
case and keep them within 2 inches
from each other. Wait for Left earbud to
turn solid white and Right to blink
blue/white. You are now ready to pair
to your Bluetooth device.
2
3
4
1
Open the charging case door and leave both
earbuds inside. Starting with ONE earbud,
quickly press the button 4x times. Light
will blink blue 4x times then turn solid blue.
Leave the earbuds in the charging case.
Repeat with the other earbud. Quickly
press the button 4x times. Light will blink
blue 4x times then turn solid blue.
Bluetooth
Settings
JLab JBuds Air
BLUETOOTH DEVICE DOES NOT CONNECT / RECONNECT
Enter your Bluetooth device settings
and forget the JBuds Air.
2
On your device, turn OFF then
ON Bluetooth.
3
4
1
Bluetooth
Settings
Bluetooth
Settings
JLab JBuds Air
i
Take the earbuds out of the case.
Wait for Left to turn solid white
and Right blinking blue/white.
Select “JLab JBuds Air” in device
settings to reconnect.
