CONNECTION TROUBLESHOOTING (CONTINUED)
JLABAUDIO.COM
CAUTIONS
• Avoid getting moisture or liquids into the tip of the earbuds
or charging port.
• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing the earbuds, stressing the cable by
rapid pulling or extreme force, or bending the cable at a sharp
angle.
• Wax may build up in the earbud tips, lowering the sound quality.
Carefully remove the wax with a cotton swab or other small tool to
improve the sound quality.
• If you experience discomfort or pain, try lowering the volume
or discontinuing use temporarily.
• If you experience regular discomfort while using this product,
discontinue use and consult your physician.
• We recommend you treat your earbuds as you would a nice pair
of sunglasses and keep them in safe location when not in use.
WARM-UP YOUR HEADPHONES
Optional: Burn-in is the process for exercising new audio equipment. We recommend 40 hours of burn-in time for most headphones to reach
optimal performance. The main purpose of the process is to loosen the diaphragm of a newly crafted headphone and to stress the headphone
driver. Normal, everyday use can also burn-in the headphones though JLab’s proprietary burn-in provides an ideal mix of sounds and
frequency sweeps to achieve this.
Burn-in your audio equipment with the JLab Audio app available on the App Store and Google Play.
Or access the burn-in method at:
jlabaudio.com/burnin
Press and hold button for 10 seconds.
Release.
Light will blink red and blue
to indicate pairing mode.
Light will slow blink blue
when Bluetooth is paired.
Note: The JLab Epic Sport can remember up to 8 devices. It will try to auto-connect to last device used.
BLUETOOTH IS CONNECTING TO AN UNWANTED DEVICE
2
JLab Gravity
Bluetooth
Settings
JLab Epic Sport
Bluetooth
Settings
JLab Epic Sport
1
If you have more than one device that was connected
to JLab Epic Sport, turn OFF Bluetooth on unwanted
devices and turn ON Bluetooth on chosen device.