Page 4 • JL Audio, Inc., 2014
Continued on Next Page
S T E P 8
Fold the cargo tray and rear seat back down.
S T E P 7
Firmly tighten the two 3/8 - 16 x 1-1/4” Hex
Bolts, then firmly tighten the two factory seat
bracket bolts.
S T E P 6
Align the holes in both brackets with the
factory seat bracket holes. Reinstall the two
factory seat bracket bolts, and hand tighten.
S T E P 5
Connect the speaker cable to the terminal cup
on the front of the Stealthbox®, and drop the
enclosure into position.
S T E P 4
Remove the two rear seat bracket bolts.
S T E P 3
Secure the Driver’s Side Bracket to the driver’s
side of the enclosure using a 3/8 - 16 x 1-1/4”
Hex Bolt, 3/8” Lock Washer, and 3/8” Flat
Washer. Hand tighten.
Repeat for the passenger side using the
Passenger Side Bracket.
Both brackets should be angled toward the
rear of the enclosure.
S T E P 2
Route speaker cable from the amplifier to the
driver’s side of the storage area as shown.
S T E P 1
Empty out the rear seat area of the vehicle.
Fold the rear seats and cargo tray up.
SB-D-QDRAMD/10TW1 INSTR_SKU# 011389
