background image

I N S T A L L A T I O N   G U I D E 

for the 

SB-VW-JETNCS/10W1v2 

SKU# 94533

2011 - Up

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.  

With proper installation, your new vehicle-specific enclosed subwoofer system  

will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your authorized  

JL Audio dealer. The installation professionals employed by your dealer have the necessary tools 

and experience to disassemble and reassemble your vehicle properly.  Also, keep in mind that your 

warranty coverage extends to 2 years if your system is installed or approved by  

your authorized JL Audio dealer. If you prefer to perform your own installation,  

please read this installation guide completely before beginning the process.

  

If you choose to perform the installation yourself, it is absolutely vital that 

the Stealthbox

®

 be properly mounted to the vehicle according to these 

instructions.  Failure to mount the enclosure properly presents two problems:  
1) The sub-bass performance will suffer due to the movement of the enclosure 

caused by the force exerted by the woofer(s).
2) A loose enclosure presents a serious safety hazard in the event of a collision 

or sudden deceleration.

Continued on Next Page 

SB-VW-JETNCS/10W1v2  INSTR_SKU#  011332

INSTALLATION  

D I F F I C U L T Y :

2

5

OUT   

OF

ESTIMATED TIME:

         1.5 HOUR

S T E P   3

Remove the clip holding the trunk liner to the rear deck.

S T E P   2

Remove the two clips holding the rear of the trunk liner in 
place.

S T E P   1

Empty out the trunk of the car so that you have a clean area 
to work in. 

Summary of Contents for Stealthbox SB-VW-JETNCS/10W1v2

Page 1: ...r own installation please read this installation guide completely before beginning the process If you choose to perform the installation yourself it is absolutely vital that the Stealthbox be properly mounted to the vehicle according to these instructions Failure to mount the enclosure properly presents two problems 1 The sub bass performance will suffer due to the movement of the enclosure caused...

Page 2: ...iner to allow the screw to pass through as shown S T E P 6 Remove the clip that holds the trunk liner to the back of the trunk S T E P 1 0 Thread a 3 8 16 x 2 1 4 Set Screw into the U Nut as shown S T E P 5 Carefully unclip and remove the trunk sill panel S T E P 9 Slide a U Nut over the factory hole in the wheel well as shown S T E P 4 Revove the trunk floor panel S T E P 8 Pictured is the hardwa...

Page 3: ...ion lines electrical wiring exhaust systems or anything else that might cause a reduction in your weekly pay Always wear eye protection when drilling S T E P 1 8 Slide a U Nut over the hole in the Bracket as shown S T E P 1 3 Align the Template Sticker over the two holes and affix the sticker S T E P 1 7 Thread a 1 4 20 KEPS Nut onto the back of the lower 1 4 20 x 1 Bolt and firmly tighten Remove ...

Page 4: ...ers are very versatile audio components Please consult the owner s manual for even more detailed information about installing and tuning your amplifier C O N N E C T I O N S Using quality power signal and speaker wire is essential in ensuring the performance of your Stealthbox JL Audio recommends using a 4 AWG power kit such as the XD PCS8 1B for your Stealthbox amplifier Other kits are available ...

Reviews: