Continued on Next Page
SB-F-EXPED2/10W3v3_INSTR_SKU#011237
SB-F-EXPED2/10W3v3_INSTR_SKU#011237
S T E P 2 3
Place a supplied 3/8-inch lock washer then 3/8-inch flat
washer onto each supplied 3/8-inch bolt.
Use two of these bolt assemblies to secure the supplied
L-bracket to the top of the Stealthbox®.
S T E P 2 2
Remove the woofer system from the SUV.
S T E P 2 1
With 10mm socket, remove the two nuts and one bolt that
secure the plastic woofer enclosure to the SUV.
S T E P 2 0
Remove the plug from the factory amplifier.
Page 4 • JL Audio, Inc 2007
S T E P 2 5
Place the Stealthbox® into the mounting area. Guide the two
factory studs through the two holes in the L-bracket.
Secure the top of the Stealthbox® using the factory nuts.
S T E P 2 7
Run speaker wire from the amplifier location to the
Stealthbox® location.
Double check the woofer for proper operation.
S T E P 2 6
Secure the bottom of the Stealthbox® using the factory bolt.
S T E P 2 4
Use the last bolt assembly to secure the supplied
Z-bracket onto the bottom front of the Stealthbox®, as
pictured.
