SLPK-POL-RZR800 INSTR_SKU# 94458
S T E P 2 1
If access to the amplifier is required, remove the four Allen
Head screws that secure the top cover. Please reference the
Amplifier settings as illustrated below, due to variances in
output from different sources, the input sensitivity settings
may need to be adjusted from these reference settings.
S T E P 2 0
C O N G R A T U L A T I O N S !
You have completed the installation for this model!
Page 4 • JL Audio, Inc 2019
All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered
trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc.
JLA-SKU# 94456 10.01.2019 • Printed in USA • ©2019 JL Audio, Inc. • For more detailed information please visit us online at
www.jlaudio.com.
(954) 443-1100
w w w. j l a u d i o . c o m
1 0 3 6 9 N O R T H C O M M E R C E P A R K W A Y • M I R A M A R , F L O R I D A • 3 3 0 2 5 • U S A
S T E P 1 9
Looking down at the battery, hook up the power and,
ground, (RED goes to the (+) terminal and BLACK goes to the
(-) terminal), securing the fuse block to the cabling with the
supplied zip-ties as shown.
S T E P 1 7
Determine a desireable location to mount the Remote Level
Control, follow the instructions that come with the RLC to
mount it using the included hardware.
S T E P 1 8
If front speakers will be used, route the Speaker Cables from
the Main Harness (shown in
STEP14
) to each speaker. When
running the wires from the firewall location as shown above
to each of the front speakers (for example, JL Audio MX650-
CCX-CG-TB as shown), make sure that those wires are secured
out of the way and cannot interfere with any safety or con-
trol functions of the vehicle.
NOTE: if no speakers are being used in the front, the
speaker wires discussed above need to be insulated
and secured out of the way.
