SB-F-EXPL3/10W3v3 INSTR_SKU# 011325
Page 4• JL Audio, Inc 2011
All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered
trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc.
JLA-SKU# 94520 07.29.2011 • Printed in USA • ©2008 JL Audio, Inc. • U.S. PATENTS: #5,734,734 #5,949,898 #6,118,884 #6,229,902 #6,243,479
#6,294,959 #6,501,844 #6,496,590 #6,441,685 #5,687,247 #6,219,431 #6,625,292 #D472,891 #D480,709 Other U.S. & Foreign patents pending.
For more detailed information please visit us online at www.jlaudio.com.
(954) 443-1100
w w w. j l a u d i o . c o m
1 0 3 6 9 N O R T H C O M M E R C E P A R K W A Y • M I R A M A R , F L O R I D A • 3 3 0 2 5 • U S A
I N C L U D E D H A R D W A R E
(1) U-Nut (1) 3/8” Split Lock Washer
(1) 3/8-16 x 2-1/4” Set Screw (1) 3/8” -16 Hex Nut
(1) 3/8” x 1-1/4” Fender Washer
S P E C I F I C A T I O N S
Enclosure Type:
Acoustic Suspension (sealed)
Driver Type:
10W3v3
Nominal Impedance:
2 ohm
Continuous Power Handling:
500 watts
P O W E R R E C O M M E N D A T I O N
JL Audio recommends high quality amplifiers such as the JL Audio XD700/5 or XD300/1. The diagram below
shows the recommended crossover settings for the XD300/1 . If another amplifier is being used, please reference
this illustration and use similar settings on that amplifier.
All JL Audio amplifiers are very versatile audio components. Please consult the owner’s manual for even more
detailed information about installing and tuning your amplifier.
C O N N E C T I O N S
Using quality power, signal, and speaker wire is essential in ensuring the performance of your Stealthbox®.
JL Audio recommends using a 4 AWG power kit such as the XD-PCS4-1B for your Stealthbox® amplifier. Other
kits are available should you be using more than one amplifier. Signal wire such as the JL Audio Premium Audio
Interconnect Cables should be used to provide signal for both channels of the amplifier. JL Audio reccommends
using 12AWG speaker wire for subwoofers such as our XC-BCS12-25.
M I D / H I G H F R E Q U E N C Y D R I V E R F I T M E N T
A variety of JL Audio coaxial and component systems will fit in the factory speaker locations of you vehicle.
Front Speaker Size / Location:
5”x 7” / 6”x 8”- Front Doors
Fits JL Audio Models:
TR570-CXi, C2-570x, C3-570, C5-570, C5-570x & ZR570-CSi
Rear Speaker Size / Location:
5”x 7” / 6”x 8”- Rear Door
Fits JL Audio Models:
TR570-CXi, C2-570x, C3-570, C5-570, C5-570x & ZR570-CSi