Page 4 • JL Audio, Inc., 2017
Continued on Next Page
S T E P 8
Remove the Template from the vehicle.
Using a 1/8” drill bit, drill a pilot hole through
each of the marks made in the previous step.
S T E P 7
Using a small pick tool, mark each of the hole
locations through the Template onto the
plastic floor panel.
S T E P 6
Position the Template on the vehicle floor. Push
the Template forward and to the outside, as
shown, until flush with the frame rails.
S T E P 5
Unplug the seat belt wiring harness.
Carefully remove the driver’s seat from the
vehicle.
S T E P 4
Remove the seat belt bolt.
S T E P 3
Slide the driver’s seat forward.
Remove the two rear seat bolts from the seat
bracket.
S T E P 2
Remove the two front seat bolts from the
driver’s seat bracket.
S T E P 1
Empty the front of the vehicle.
SB-CAN-MVX3/10TW3 INSTR_SKU# 011492
