5
16
15
14
13
Apply silicone along the inner ring on the back
of the enclosure. Do not apply any silicone in the
outer groove of the enclosure. For best adhesion, it is
recommended to clean rear of aluminum cap with
acetone. Do not let acetone come in contact with the
enclosure. It will permanently mar the surface.
Align the rear cap to the desired angle and press it
onto the back of the enclosure. Apply tape to hold
the cap in place until the silicone is cured.
Pull the speaker out of the enclosure and rotate it to
the desired angle, then reinstall the speaker mount-
ing screws. Remove adhesive backing and install the
JL Audio logo badge (Sport Grille Models Only).
If a diff erent speaker angle is desired, remove the
speaker mounting screws.
Horizontal Mounting
|
